|
STANDARD PRODUCTS
All shielding gaskets shown in this catalog are available
with optional conductive outer layers and specific product
treatments. To construct a discrete part number for your application,
follow the guidelines below. Characteristic suffix descriptors
are added to the desired part number found in the preceding
product pages. Profile tolerances standard per RMA Class Sil
A2. Closer tolerances available upon request.
|
Part #
|
1020-
|
01 -
|
D50 -
|
BLU -
|
NPS -
|
SPL -
|
1200
|
|
refer to chart
|
A
|
B
|
C
|
D
|
E
|
F
|
G
|
| A |
D |
| PART NUMBER FROM CATALOG |
CORE MATERIAL |
| |
ORA -Orange (STD) |
| B |
GRA -Gray |
| CONDUCTIVE OUTER LAYER |
WHI -White |
| 01 - Standard Silver (Ag) |
BLU -Blue |
| 02 - Silver Plated Copper (Ag/Cu) |
VIO -Violet |
| 03 - Silver Plated Aluminum
(Ag/Al) |
BLA -Black |
| 04 - Silver Plated Nickel (Ag/Ni) |
RED -Red |
| 05 - Silver Plated Glass Spheres
(Ag/GL) |
|
| 06 - Gold (Au) |
E |
| 07 - Copper (Cu) |
MOUNTING TAPE OR CLIP
|
| 08 - Nickel (Ni) |
NPS -No Pressure Sensitive
Tape |
| 09 - Carbon, Low Resistivity
(CL) |
PSA -Pressure Sensitive Tape
(min. width 0.1") |
| 10 - Carbon, Standard (CS) |
EPSA - Extended Pressure Sensitive
Tape *(see |
| 11 - Silver in
Fluorosilicone (AgFK) |
below) |
| 12 - Silver in
EPDM (AgEP) |
CPS -Conductive Pressure Sensitive
Tape |
| 13 - Silver in Fluorocarbon
(AgFC) |
ECPS - Extended Conductive
Pressure Sensitive |
| 15 - Silver, Abrasion Resistant
(AgX) |
Tape *(see below) |
| 16 - Blackened Silver (Ag-Dk) |
DCPS -Double Coated Semi-Rigid
Pressure |
| 17 - Silver Aluminum (AgAl-Dk) |
Sensitive Tape for Stiffness
Enhancement |
| 18 - Other |
CLP -Mounted Clip |
| |
SPEC -Special |
| C |
|
| DUROMETER |
F |
| D30 -30 Shore A Durometer |
PACKAGING |
| D50 -50 Shore A Durometer (Standard) |
SPL -Spooled on a Reel |
| D75 -75 Shore A Durometer |
CTL -Cut To Length |
| FR - Flame Resistant, 60 duro.
(Brown Only) |
COI -Coiled Loosely |
| SPG -Closed Cell Silicone Sponge |
BND -O-Rings, bonded |
| LOG - Low outgassing silicone
|
FRM - Mitre-spliced window
frame |
| |
SPEC - Special, Custom Finishing |
| |
|
| |
G |
| |
LENGTH |
| |
Standard - 1,200 Inches |
| |
Custom Length (in Inches) |
| |
For O-rings - Length
= Circumference |
*optional "Quick Start" easy removal extended adhesive
liner (ECPS & EPSA above)
An extended pressure sensitive adhesive protective liner option
is now available on all Ultra-Vanshield® RFI-EMI shielding
gaskets. The extra wide tear-away liner protrudes outboard
of the gasket body for easy and fast removal during installation.
engineering test kit
An EMC test lab kit which is capable of immediate problem
mitigation from the generous supply of each style included.
There are 32 feet each of nine distinct part numbers, representing
the most common styles for electronic enclosure gap ranges
from 0.020” to 0.300”. Installation guidelines and
further product information are included.
STATEMENT IN LIEU OF WARRANTY: The information herein is
true to the best of our knowledge, and is based on data believed
to be reliable. Vanguard Products Corporation, however, assumes
no liability for product failure unless specifically stated
in writing. There are no warranties, express or implied, of
merchantability, fitness, or otherwise. Vanguard Products
Corporation shall not be liable for any special, incidental,
or consequential damages. No statement contained herein shall
be construed as an inducement to infringe existing patents.
Product testing by the purchaser is recommended to confirm
expected results.
|
